Description
Raise your level with the GameMax Hype Mid-Tower gaming case.
This ATX chassis is a high-performance premium product with a distinctive design. Utilising three attractive tempered glass panels providing an uninterrupted, panoramic view of the interior. Show off your high-end gaming hardware thanks to the GPU support.
With three pre-installed GameMax Infinity ARGB Dual-Ring fans this case will keep your gaming PC at optimum temperatures. The Hype has room for up to nine cooling fans and a 360mm liquid cooling radiator at the top, with the dual-chamber design lets you have your all-important hardware on display while keeping your drives, cables and power supply hidden away.
Moving onto the front of the case the I/O panel provides USB3.0 and Type-C connections and inside the Hype we have included the GameMax Version 4.0 PWM ARGB hub with controls for your LED lighting and have access to approximately 368 LED modes or have access to 16.8 million colours using a compatible addressable RGB Motherboard.
This completely white interior has huge build potential with a spacious open interior and plenty of cable management to build a powerful dynamic gaming PC. It can fit a graphics card up to 42 centimetres in length, CPU Cooler up to 18.5 centimetres in height and can hold 2 x 2,5 and 2 x 3,5 drives. An ATX power supply unit measuring up to 200mm will fit inside.
Elevate your aesthetic with the Hype and create the ultimate gamers case with its eye-catching design this chassis is a stylish addition to your gaming set-up.
Features
- Hype In All White– The GameMax Hype finished in all white and features a 3-piece panoramic tempered glass design with a forty-five-degree viewing angle captures the attention and draws the eye of the viewer into the case. Built for the ultimate photo and display potential. See your build the way it was meant to be seen from the left or right side of your desk with a simple turn.
- PCIe 4.0 Riser Cable (Sold Separately) – The latest PCIe 4.0 supports transfer rates of 16 GT/s bit rate, the rate is double of the Gen 3.0, the Gen 4.0 remains backward compatible with a maximum transfer speed offers a great performance and shows off the GPU at a great new angle.
- Dual Chamber Layout – Different from traditional computer cases the Hype is designed using a dual chamber layout which provides plenty of space for your hardware, good airflow & ventilation, cable management and guarantees you can create a beautiful build. The dual chamber design allows you to situate your power supply, hard drives and cables in the rear chamber freeing up the main chamber for your fan and radiator mounting points creating an unrestricted view of your components that matter.
- Three-Slot Vertical GPU Mount – Vertically display a GPU graphics card, highlight and bring more appeal and aesthetics to your final build thanks to the support for a vertical graphic card layout with a triple PCI-E slots design.
- Three Infinity ARGB Dual-Ring Fans Included – Three GameMax Infinity ARGB Dual-Ring fans are pre-installed with a nine-fan blade fan design and equipped with 24 individually controlled Addressable RGB LEDs spilt into two rings (16 + 8 – Outer + Inner) add a stunning finish. Equipped with a rifle bearing motor reducing the noise and making it more efficient.
- Stunning Aesthetics – Stand out thanks to mesmerising infinity mirror LED ring effect on the fans you will not be able to take your eyes off it.
- Motherboard Software – The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.
- GameMax V4.0 ARGB PWM Hub – A 9-port ARGB PWM Hub is included inside the Hype with 8-ports available to connect 3 or 4pin cooling fans and 1-port available to connect to a CPU cooler fan. Designed with a magnetic bottom the hub can be installed anywhere inside the chassis to accommodate your build. Prepare for anything with three options of controlling your ARGB, first option is linking the LED or reset switch for manual control, second option is using the included RF remote controller and third option is using Motherboard software with 5V ARGB Aura Sync support.
- PWM Intelligent Temperature Control – The GameMax Version 4.0 PWM ARGB hub can be connected to CPU fan interface on your chosen Motherboard to access temperature readings. The Hub adjusts the fans automatically based on the CPU temperature, when getting hotter increasing their speed to swiftly cool it down and when the CPU temperature decreases the fans automatically slow reducing the overall noise.
- USB Type-C Port – The GameMax Hype includes a USB Type-C connection and have up to 10Gbps transfer speeds.Bottom Panel I/O – Puts your connections within easy reach including 1 x USB Type-C and 1 x USB3.0 Ports and a combination audio/microphone jack.
Description
Specification
- Form Factor: ATX
- #Hide#Small Form Factor: No
- Power Supply Wattage: No PSU
- Motherboard Support: “ATX, Micro ATX, Mini ITX”
- #Hide#Window(s): Yes (Window)
- #Hide#LED Lighting: Yes (LED Lighting)
- Connectors / Controls: 1 x USB 3.1 Type-C
1 x USB 3.0
1 x HD Audio
1 x Microphone
Reset Button (If Connected)
RF Remote Control (for fans) - Drive Bays: 2 x 3.5″” Internal
2 x 2.5” Internal - Expansion Slots: 10 x Full Size Expansion Slots
- Cooling System: Included:
Rear: 1 x Infinity 120mm ARGB Dual-Ring Fan
Side: 2 x Infinity 120mm ARGB Dual-Ring Fans
ARGB PWM 9-Port Hub
RF Remote ControlFan Mounts
Front: None
Top: 3 x 120 mm
Rear: 1 x 120 mm
Side: 2 x 120 / 2 x 140 mm
Bottom: 3 x 120 mm - .:
Radiator Support:
Top: Up to 360 mm
Rear: 120 mm
Mainboard Plate Bottom: Up to 280 mm - Colour: White
- Material: Body: 1.07mmSPCC
Front Bezel: Tempered Glass
Side Panel: Tempered Glass - Compatibility: GPU max length:
420 mmCPU cooler max height:
185 mmPSU max length:
200 mm - Weight/Dimensions: 11.7 kg
(WxHxD) 310 x 476 x 425 mm - Additional Features: See Overview
- Accessories: Accessories
V4.0 PWM ARGB Hub
GPU Support
PCI Riser Card Bracket
Manual - Package Weight: 13.5000 kg
- Warranty: 1 Year
